Re-programming Remotes

[Guest raymond]

can anyone please tell me how to re-programe 2 remote keys as i can only get one working or the other.but only one will start the car.

many thanks

ray

[Guest GerryMc]

You need to do one and then the other in the one programming.

This will get both working.

[Guest fredt]

only one key starts the car.............sounds like its not programed into the PAT's system!

 

to program in the remote.......

sit in the car, close the doors

turn the ignition switch from position 1 to position 2, four times in six seconds

you should then hear a chime and the led will illuminate

press any button on one remote, the chime should sound again and the led will flash to show the remote has been accepted?

if this happens you a further ten seconds to push a button on the second remote! the chime should sound and the led flash again to show that remote has been accepted?

up to four remotes can pe programed into the system!

to stop the programing mode either switch the ignition switch to position 3 or program in four seperate remote and the system automatically closes