Rasto Posted June 28, 2022 Report Share Posted June 28, 2022 Hi all, I am looking for any advice and help, the AC on my ford galaxy (2010), starts failing. It is running well after start for about 10-15 minutes, blowing cold air (very cold air), after that it starts blowing just warm air. I've been advised to change the pressure sensor, what I done, but still the same problem. The live data on ForScan shows that the engine cooling fan runs between 7 to 16%, and engine temperature is around 76°C. The compressor seems to be running, at least when an AC is on the clutch is rotate, when off it stops. I had third zone disconnected about 2 years ago, due to some failure, but then all was working fine. Just this summer this issue pops up, Any ideas, clues what could be an issue? Thanks in advance. Regards Rasto Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.