Lauren100 Posted February 20, 2018 Report Posted February 20, 2018 2008 2lt tdci galaxy. New turbo fitted last year. Still went into limp mode then new sensors fitted and still sluggish going up hill. Engine malfunction light will come on and car go into limp mode. It's soo frustrating! Anyone else had these issues?? Quote
BrianH Posted February 20, 2018 Report Posted February 20, 2018 You need to find out what fault codes are being generated - Limp mode has a number of possible causes. A cheap OBD reader should be enough for that. Like this for example (the even cheaper ones will at least read the codes, but may not give you a meaning in english, just a code number) https://www.ebay.co.uk/itm/Car-Fault-Engine-Diagnostic-Scanner-Code-Reader-Reset-Tool-OBD-2-CAN-BUS-EOBD-UK/272713992050 You have a MK3 BTW, so your in the wrong section of the forum, but once you know what codes are being generated you should be able to search for them on here or elsewhere, to give you an idea what the problem is so you know what to look at. Quote
Lauren100 Posted February 20, 2018 Author Report Posted February 20, 2018 Thank you for your reply Quote
gregers Posted February 20, 2018 Report Posted February 20, 2018 i will move this to the correct part of the forum you can do a basic onboard diagnostic check through the display. Quote
xavier Posted February 24, 2018 Report Posted February 24, 2018 Was the DMF replaced at the same time as doing the turbo? Quote
xavier Posted February 24, 2018 Report Posted February 24, 2018 sorry, I meant DPF - Diesel Particulate Filter, not the DMF! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.