Shidahall Posted October 31, 2017 Report Posted October 31, 2017 HiI’m hoping someone can help me My right indicator simultaneously stops working. Left one is fine. Hazards work too. When I sometimes press the hazards it’ll get the right one to start working again for a short time but then stops working again. Thank you. Quote
BrianH Posted October 31, 2017 Report Posted October 31, 2017 2010 would be a mk3 - is it just one of the indicators that stops or all of them? Just one would suggest dodgy bulb (broken filament flapping around or bad contact with holder) or wiring issues. All of that side playing up suggests either wiring or the switch/stalk itself. Possibly the flasher relay if it has one, though folks in the mk3 section probably better able to tell you. Quote
Shidahall Posted October 31, 2017 Author Report Posted October 31, 2017 It’s 2013 plate. Only when using the right indicator. Not sure if it’s mk3. I’ll have to check that! Thank you for replying. Quote
gregers Posted November 1, 2017 Report Posted November 1, 2017 it is a mk3,so ive moved it to the correct section,do above as brian has suggested,even for a new motor you will still get the same old problems. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.