tony p Posted August 19, 2015 Report Posted August 19, 2015 Hi i have just replaced the linkage on my 1999 galaxy now the the wipers will not work they catch each other and when i put on single wipe they stop at the top of the screen any help please iam ripping my hair out Thanks Tonyp Quote
chromedome Posted August 19, 2015 Report Posted August 19, 2015 You did not have the linkage in the correct position when you reassembled it all. Quote
tony p Posted August 19, 2015 Author Report Posted August 19, 2015 DO I HAVE TO SET THE LINKAGE IN THE DOWN POSITION TO REASEMBLE IT Quote
SilverBeast Posted August 19, 2015 Report Posted August 19, 2015 Did you replace the whole linkage including the motor, or swap the motor from one linkage to another? You need to disconnect the motor from the linkage and then "run" it and turn it off so that it "parks". You then need to reconnect the arms on the linkage. This shows a MKII three bolt assembly so you can have a look at the position of all the bits and includes instructions on setting up again. Quote
tony p Posted August 19, 2015 Author Report Posted August 19, 2015 Very helpfull thanks a lot silver beast tony p Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.