Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

If I leave my car a couple of days car won't start , even sounds like it's struggling to cope when just left . Why would the battery go flat is it possible it's draining itself or is it just Knackered .

Thank for any help

Posted
It's a 2001 tdi battery just over a year old , battery is for the car . Managed to jump lead it off this morning and daft thing is its started every time since didn't go for a drive . Really confusing me .
Posted
All wires in tailgate done last year . Garage thinks alternator going should be at 14 and mines pushing 13.4 over my head but gotta trust em lol
Posted

That does sound a bit too low to charge the battery to me generally its over 14v to charge as they have said.

I'd still recheck the tailgate wiring though even if its been done previously as the design of it makes it very prone to failure if you still find problems afterwards.

Posted
I'll have a look tomorrow , my soldering ain't that good lol
Posted

just a thought check the fuse box under the bonnet and the main cable from the alternator to the board ?.

Posted

Had a look at that was a bit green so wire woo led it and cleaned it with a bit of wd40 but only the bit I could see didn't wanna take anything to bits ,

Would this stop it from charging correctly

Posted

Took me ages to find out why my battery kept draining and eventually found the switch to the glovebox light had fallen away leaving the light on all the time.  Worth a look.  Good luck .

Posted

Had a look at that was a bit green so wire woo led it and cleaned it with a bit of wd40 but only the bit I could see didn't wanna take anything to bits ,

Would this stop it from charging correctly

 

The crimp on the mk2 versions is known to be a cause of issues which ends up melting the fusebox. If it looks corroded you may have found your issue. Easiest thing to check first is the output from the alternator itself - if this is significantly higher than what your seeing on the end of the cable then you need to replace the cable (solder the end to the connector to stop it happening again - detail in the faqs)

Posted
Thank you so much glove box light on , looks like someone has smashed the fittings it doesn't close properly taken the bulb out that should help
Posted
Don't know why wont let me like posts or my answers sorry , and thanks for all your help

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...