Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Hi Guys

 

The electric mirror on the passenger side only goes up and out it wont go in or down

its been so since I've had the car over  two years now and thought it was about time I tried to sort it

Also the passenger mirror doesn't demist since I've had  the Galaxy but the drivers side is fine and also demists and so does the rear window

I have changed the mirror for a new one and changed the motor for a second hand on but the faults are still present

the wiring seems fine and original and the  connections clean, I am not sure if it's the switches as we are dealing with two separate circuits I would think it unlikely they are both faulty.?

 

Any help or ideas would be greatly welcome

 

Thanks 

 

Posted

i would take a very close look at the wiring.

Posted (edited)

Yes, but it's more likely to be in the rubber gaitor between the body and the door as this is where the stress and bending happens.

 

It could be in the drivers door gaitor too or even the hatch as failures in the wiring can cause shorts and all sorts of weird things can happen.

 

I'd check passenger door gaitor first then the one in the drivers door if I were you.  It could still be the switch and it would be easiest to check that if you have access to a spare to substitute (scrapyard?)

Edited by SilverBeast
Posted

The rear hatch wiring can cause all sorts of wierdness - I've recently finished repairing mine to discover its appears to have been the cause of problems with the radio amongst other things. Out of all the wires there there were only 2 intact ones in mine, so it made me wonder how anything still worked on the boot.

 

Start with the passenger one though, if you get to the point of getting the door cards off be prepared to replace some of the yellow clips that hold them on as they break quite easily (its only held by a screw near the handle, clips and the top edge resting ontop of the door)

Posted

stupid boy pike. :38:

 

That emoticon always reminds me of the guy at work who put his tounge on one of our temperature plates when it was set to -40C!  He had to wait till we had got it to warm up before he could take it off again.

Posted

We try to let new starters know too.  Obviously I believe it should be part of the health and safety briefing!  Unfortunately we aren't allowed phones in the labs so I don't believe there are any pictures.

 

Haven't been called a lad in a while. I'm 50 this year!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...