mrben Posted August 4, 2013 Report Posted August 4, 2013 Erm, my anti roll bar seems to be moving? The bushes seem pretty tight, as i undone the two bolts around the rubber bushes on the roll bar, so i could move it back over with a lever. With a lot of tugging, i managed to get it back enough to stop the end part of the roll bar fouling the chassis whenever you go over a bump...A month later, its now moved over again, and fouling again. Anyone else had this?Ta. Quote
seatkid Posted August 4, 2013 Report Posted August 4, 2013 Must be being pushed over by the droplinks? Faulty droplink perhaps or maybe one of the arb bushes is shot. Quote
viperclive Posted August 5, 2013 Report Posted August 5, 2013 The bushes may look ok but they are not locking into roll bar, also when they go hard they can cause bad clunking from the suspension. Quote
sparky Paul Posted August 5, 2013 Report Posted August 5, 2013 Check your springs. I had this when one of my front springs lost a coil. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.