yapjack3 Posted July 19, 2013 Report Posted July 19, 2013 My drivers door doesn't quite shut tightly at the top next to the pillar and I get a bit of wind noise through it. I've loosened several nuts and bolts but none seen to be able to adjust the fitting of the door. Any clues? Quote
traff Posted July 19, 2013 Report Posted July 19, 2013 i take it the car has not been damaged by vandals ? how i would do this sounds very harsh..but its how its done.....wind the window all the way down grab the very top of the door frame put your knee against the top of the door card area and give a good tug several attempts of this may be necessary make sure window is down or it will shatter regards traff Quote
Thomsy Posted July 27, 2013 Report Posted July 27, 2013 Just tried this myself...brilliant. Took 6 tugs but I was being very cautious at the start. Dont think I used to get any wind noise but it didnt look quite right. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.