Run On Pump Brushes

[Galaxy newbie]

Hi, anyone on here know where I can get the brushes for the run on pump, I'm sure I read a post about someone on here that sells them but I can't find the post! Thanks. Andy

[Barlidge]

+1 for a link to the brushes pls if somebody has it.

 

Ty

[Scottyboy89]

+2 for me

[BigDog]

From my experience it takes less time to make some to fit by filing down easily available slightly larger ones, compared to spending ages online in a possibly fruitless attempt to find ones that are just right. Check the FAQ for how to do it. Mines been running fine now for 6m after doing the job.

Matt

[TDIPAZ]

try this guy.  for pump motor brushes. i can,t remember the size i ordered that i had now, but measured old ones.On receiving, i sniped off the teminal ends of the new ones & soldered onto original ends. jobs a gooden :-) ..got correct size too. no need to reduce size. on ebay....  Wheelcare(UK)Ltd.Tel.01270878309

Edited June 24, 2013 by TDIPAZ

[bigdave982]

My post is in the sales section regarding brushes for sale Edited June 24, 2013 by bigdave982

[Barlidge]

Cheers for replies, only just noticed them, not getting email notifications.

 

Edit: just updated settings 

Edited June 24, 2013 by Barlidge

[xavier]

I used these (still working 6 months later). I had to trim the length, but otherwise were a perfect fit.

 

http://www.amazon.co.uk/Power-Replacement-Carbon-Motor-Brushes/dp/B008P7NFTI/ref=cm_rdp_product

 

You could also try these, a bit longer.

 

http://www.amazon.co.uk/13mm-Motor-Carbon-Brushes-Power/dp/B008IEVWBQ

[Pemo]

I changed the pump into a brushless pump from BOSCH. Works nicely. http://www.fordgalaxy.org.uk/ford/index.php/topic/23824-front-heater-no-good-rear-heater-ok/?hl=%2Bbosch+%2Bpump&do=findComment&comment=170750

Peter

[Kev_B]

These are the correct size, no cutting or grinding needed.....

 

http://www.ebay.co.uk/itm/141010935373?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649            ;)

[xavier]

Well the ones I got were 10x5x5 and needed trimmed to fit. I'd imagine the ebay ones would be the same unless they're connected to the side rather than end as shown in pic.

[bigdave982]

Mine are cheaper lol and making em fit is all part of the fun :-):-)

[xavier]

Don't think they are Dave, 4 for 202pence including postage. However I couldn't find side entry brushes to fit and I reckon the extra length on the brush you'd get with side entry would be worth a year or two.