Argrdnr Posted March 16, 2013 Report Posted March 16, 2013 A previous owner of my car has prepared a nice long stratch along the side of the car is it easy enough to just t cut it or shall I spray can it? Any advice is most welcome. Quote
smudger Posted March 16, 2013 Report Posted March 16, 2013 I am one strongly against the use of rattle cans, depending on how deep the scratch is 1) deep scratch filler first sand and spray 2) if its not really deep go to a paint shop and get them to make u a touch up pen to match colour apply pen to scratch let dry build up a few coats doing this allow to cure for 48 hours then use a cutting compound to flatten. if your going to use a spray can be sure to mask above and below scratch and use maybe newspaper above and below, watch for that overspray Quote
Argrdnr Posted March 16, 2013 Author Report Posted March 16, 2013 The stratch isn't deep, think it has had the filler, unfortunately a touch up pen just won't cut it, the stratch is too big and long. Quote
smudger Posted March 16, 2013 Report Posted March 16, 2013 well my advice i would say mask it as narrow as possable and primer it then 1500 sand primer 1500 sand get it filled in and flat with primer then rattle can it then 2000 sand it Quote
seatkid Posted March 17, 2013 Report Posted March 17, 2013 If its just a deep lacquer scratch,clean well, fill the scratch with lacquer (mask and a few sprays with the can, waiting 10 mins between each stroke). Then leave to dry, cure and harden for 48 hours or more. Finally use a fine cutting paste or t-cut to level off the area and polish it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.