Stet28 Posted December 21, 2012 Report Posted December 21, 2012 Got a code po171 bank 1 lean on a 04 2.3 petrol (gas converted) changed idle control valve, cleaned throttle control also cleaned mass air flow sensor. My car is holding revs 1100-1200 instead of its normal 850ish when idle. When stopping the revs will shoot up to as much as 3500 but mostly 2500 any suggestions? Quote
Stet28 Posted December 21, 2012 Author Report Posted December 21, 2012 (edited) I've also replace the battery disconnected lamba sensors still doing the same! Edited December 21, 2012 by Stet28 Quote
seatkid Posted December 21, 2012 Report Posted December 21, 2012 I would say you have air leak post throttle. Check the brake vacuum pipe - commonly it splits at the ends i.e. brake servo end and inlet manifold end. Quote
Stet28 Posted December 21, 2012 Author Report Posted December 21, 2012 All checked no problems … got no power to fuel vapour unit do u know would that be in fuse or relay? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.