a18nkd Posted November 5, 2012 Report Posted November 5, 2012 (edited) Hi i just done the first service on my 1998 galaxy it has the AHU engine 1.9 diesel and the oil filter that was on it was a FRAM PH3569 but the one i received off the auto parts place was a FILTRON OP525/3 The new filter is smaller than the one that was on does this make a difference? The thread on the new filter is the same as is the rubber seal on the top but the depth is about 1 and 1/2" smaller the x-reference on the side of the box is :- - MANN/HUMMEL W830/1 - FRAM PH5833 - KNECHT/MAHLE OC262 - PURFLUX LS214 - FILTRON OP525/3 Can any one tell me if i have the right one or was the old one the right one? I have rang the place and they said that as long as the thread and seal is the same size it's ok just the different make (i.e the depth) any help would be very greatful thanks! :angry: Edited November 5, 2012 by a18nkd Quote
viking Posted November 5, 2012 Report Posted November 5, 2012 The correct filter for the AHU engine is Mann W840/2 or equivalent. Quote
seatkid Posted November 6, 2012 Report Posted November 6, 2012 (edited) The Mann W830/1 is for the 110bhp AFN engine. FRAM, PURFLUX and FILTRON are aftermarket brands that I would steer well clear of. Genuine filters are not that expensive http://www.ebay.co.uk/itm/VW-GOLF-PASSAT-SHARAN-OIL-FILTER-068115561E-NEW-GENUINE-/380333514846 Edited November 6, 2012 by seatkid Quote
a18nkd Posted November 6, 2012 Author Report Posted November 6, 2012 would this damage my engine as i need to take the other half to hospital for the baby scan and would need a new delivered was the old one the right one then ? and thanks again for your help Quote
seatkid Posted November 6, 2012 Report Posted November 6, 2012 would this damage my engine as i need to take the other half to hospital for the baby scan and would need a new delivered was the old one the right one then ? and thanks again for your help In the very short term (less than 1000 miles) probably not. The Filtron part is fiited with a pressure relief valve set at 9-15psi. The correct filter has a relief valve set at 19-37 psi. This along with the smaller size means the filter will bypass much earlier in its service life, leading to unfiltered oil going around the engine causing premature wear and damage. The FRAM filter is listed as an equivalent to the correct VAG part 068115561. Quote
a18nkd Posted November 6, 2012 Author Report Posted November 6, 2012 (edited) cheers seat kid off to kick the arse of the auto place bloke tomorrow they even took my reg "to get the right parts" Edited November 6, 2012 by a18nkd Quote
seatkid Posted November 6, 2012 Report Posted November 6, 2012 The correct Filtron part for a AHU is OP 525/4 OP 525/3 is for the AFN (110bhp) engine. Quote
a18nkd Posted November 7, 2012 Author Report Posted November 7, 2012 YES he's apologised said he'd gave the wrong part no. and has refunded the cost as i've already ordered the one off the link you gave me seat kid should be here tomorrow and thanks again Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.