toby1966 Posted October 19, 2011 Report Posted October 19, 2011 I have had my clutch replaced,this was about a week ago and i have had nothing but problems.It keeps on staling at low revs and when i approach a junction it will stall.I decided to take off the throttle body and air filter an cleaned these thoroughly i then bought some wynns carb cleaner and duly followed the tin and sprayed it into the intake and also the vacuum hose now it wont start and every time i turn it over its like no fuel is getting through,when i stop i have a beeping sound coming from the dash somewhere can any one suggest why this is happening.When i do get it running again it is going straight back to Mr clutch!!!!!!!!!!!!please help. :( :angry: Quote
cyborg Posted October 19, 2011 Report Posted October 19, 2011 I have had my clutch replaced,this was about a week ago and i have had nothing but problems.It keeps on staling at low revs and when i approach a junction it will stall.I decided to take off the throttle body and air filter an cleaned these thoroughly i then bought some wynns carb cleaner and duly followed the tin and sprayed it into the intake and also the vacuum hose now it wont start and every time i turn it over its like no fuel is getting through,when i stop i have a beeping sound coming from the dash somewhere can any one suggest why this is happening.When i do get it running again it is going straight back to Mr clutch!!!!!!!!!!!!please help. :( :angry: Hi what engine do you have ? If its vr6 and you've disconnected carb to clean try disconnecting pos + neg to battery for a minute or 2 then reconnect turn key to on but don't start this should reset carb you will hear it buzz . Quote
toby1966 Posted October 20, 2011 Author Report Posted October 20, 2011 I have had my clutch replaced,this was about a week ago and i have had nothing but problems.It keeps on staling at low revs and when i approach a junction it will stall.I decided to take off the throttle body and air filter an cleaned these thoroughly i then bought some wynns carb cleaner and duly followed the tin and sprayed it into the intake and also the vacuum hose now it wont start and every time i turn it over its like no fuel is getting through,when i stop i have a beeping sound coming from the dash somewhere can any one suggest why this is happening.When i do get it running again it is going straight back to Mr clutch!!!!!!!!!!!!please help. :( :angry: its a 2.3 dohcHi what engine do you have ? If its vr6 and you've disconnected carb to clean try disconnecting pos + neg to battery for a minute or 2 then reconnect turn key to on but don't start this should reset carb you will hear it buzz . Quote
Amarok Posted October 21, 2011 Report Posted October 21, 2011 (edited) Is petrol getting to the injectors ?when was the fuel filter changed ?fuel pump working ?? Edited October 21, 2011 by Amarok Quote
toby1966 Posted October 21, 2011 Author Report Posted October 21, 2011 Is petrol getting to the injectors ?when was the fuel filter changed ?fuel pump working ?? WHERE AND HOW WOULD I FIND AND CHANGE THESE??MANY THANKS Quote
Amarok Posted October 21, 2011 Report Posted October 21, 2011 Hi,fuel filter is underneath !, by the drivers seat and usually is blocked as it tends to get missed ( Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.