brett Posted October 17, 2011 Report Posted October 17, 2011 High here`s a strange one the heater control panel does not lite up ,and the heater has stopped working,fan works fine,i have checked fuses they are ok ,any ideas Quote
daddyfixit Posted October 17, 2011 Report Posted October 17, 2011 easy; you need to remove the knobs,front panel etc.remove the heater contorl assembly carefully and remove the 2 wiring multi plugs altogetherswitch ignition on and then turn it offreconnect multi-plugs,refit control unit and its facia.dials etc you should find it now works Quote
brett Posted October 19, 2011 Author Report Posted October 19, 2011 Cheers i will give that a try Quote
brett Posted October 19, 2011 Author Report Posted October 19, 2011 Brilliant it worked ,i can ditch the blankets now ,if you need a Guitar fixing im`e your man Cheers Ray Quote
Airrex7 Posted October 20, 2011 Report Posted October 20, 2011 Thought I would add to this. Discovered I had kind of same problem, no warm air when heater was on. Mine is a Mk2 Galaxy but with the analog heater display, used it yesterday for warm air, fans working ok, controls set correctly but blowing cold air instead of warm. Solution, topped up the expansion vessel, problem sorted. Quote
Paulx3 Posted October 6, 2012 Report Posted October 6, 2012 Had same problem, seems obvious but the coolant level was low, topped up and now fine. Quote
Caff Posted February 22, 2013 Report Posted February 22, 2013 (edited) I had the same problem as the initial poster and the solution worked for me. I prized the surround away but did not need to remove the dials. Not sure they could come off! Then just four torx screws and the controls are out. Simples. Thanks daddyfixit. Edited February 22, 2013 by Caff Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.