mistergut Posted July 23, 2011 Report Posted July 23, 2011 (edited) hi iam new to this forum, i have a problem with a error code p0135 02 sensor, i have replaced this with a new one, ive cleared the code but still keeps coming back after i drive it for a while,has any one eles had the same problem and found a fix, many thanks. sorry forgot its a ford galaxy mk1 2.0i 1996. Edited July 23, 2011 by mistergut Quote
sparky Paul Posted July 23, 2011 Report Posted July 23, 2011 welcome to the forum! :) P0135 is related to the lambda sensor heater circuit, current is outside expected parameters. Check that the connections are clean, the voltages involved are low and a good connection is critical. Also check for any broken or chafed wiring in the loom to the sensor, and check to see if you have any blown fuses affecting the supply to the sensor. Quote
mistergut Posted July 23, 2011 Author Report Posted July 23, 2011 would there be a stand alone fuse to the sensor for power. Quote
mistergut Posted July 27, 2011 Author Report Posted July 27, 2011 think i sorted it now so far so good code has gone.i cleaned the conections lets hope it stays off. Quote
sparky Paul Posted July 27, 2011 Report Posted July 27, 2011 think i sorted it now so far so good code has gone.i cleaned the conections lets hope it stays off.Sounds promising, good to hear. :) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.