Hands on Mark Posted June 10, 2011 Report Posted June 10, 2011 Hi I have read the (brilliant) pdfs and set out to replace my door wires which have all cracked and / or brocken. Unfortunately one of the wires has broken off right at the connector. The pin it should be attached to is loose but I can't get it out and don't want to break it - advice please Quote
roy202 Posted June 10, 2011 Report Posted June 10, 2011 hi if you cant repair it the only option is to replace it. get one off of another car including the loom or at least a good part of it so that you can join all the wires....i would try a bit harder first though to repair the one you have, if you break it you break it, it can always be replaced Quote
Hands on Mark Posted June 10, 2011 Author Report Posted June 10, 2011 hi if you cant repair it the only option is to replace it. get one off of another car including the loom or at least a good part of it so that you can join all the wires....i would try a bit harder first though to repair the one you have, if you break it you break it, it can always be replaced Thanks I'll see if I can find a breakers in Biringham and have that "spare" just in case - with a good length of wire I could then make the splices in the door compartment which gets them away from all the flexing Quote
cyborg Posted June 10, 2011 Report Posted June 10, 2011 Bodge ALERT :) put a spade on a new piece of wire then jam spade into hole next to old pin put some solder on it join wire happy days :) Quote
Mirez Posted June 10, 2011 Report Posted June 10, 2011 Bodge ALERT :) put a spade on a new piece of wire then jam spade into hole next to old pin put some solder on it join wire happy days http://www.fordgalaxy.org.uk/ford/public/style_emoticons/default/dry.gif Dear God Man! :) :) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.