Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Just had my car in the garage to fix limp mode problem that turned out to be maf sensor although nothing was pointing at that.

anyway they gave me a list of other things that need doing and i would like some advice compressor pulley being the most concering to me.

 

tyres close to leagal limit /easy get tyres replaced.

 

brake judder noticed on road test /there was terrable brake judder when i bourght the car so i replaced the front disks and pads my self a month or two ago and the brake judder was gone but it seems to have come back not as bad but noticeable when braking at high speed could it be the disks again or is there something else that causes that. Is it a mot fail

 

air conditioning pump pully in poor condition.the chap in the garage says there is play in the pulley and said it could be just a new pulley best case or could need a new compressor worst case /the a/c dosnt work at the moment no gas in the system is it likey to be the pulley is it easy to check and replace the compressor dosnt make any funny noises.

 

inner cv boots need replaceing i new this and was going to give this a bash my self has anyone tryed these stretch on c/v boots are they any good

 

aux belt needs replaceing again new this and was going to do this my self is this easy job i know on my old vectra the aux belt when round a engine mount and was a b##ch.

 

and last but not least play in front top strut mountings ive seen on another post it is unlikely thay they are worn how would i check if these need replacing..is this mot fail

 

sorry theres so much in this post but the quote ive been given to get all this fix is over

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...