FLENG Posted March 22, 2011 Report Posted March 22, 2011 hi all i fitted a new ecu from an auto into a manualthe sensors work at the front but not the back is this because i havent had the ecu coded back to a manual? Quote
Mirez Posted March 22, 2011 Report Posted March 22, 2011 (edited) Shouldn't make any difference - the ECU is simply looking for 12V on pin 6 which it gets from the reverse light feed so as long as the reverse lights are working you should be fine. I'll check the coding though - with VagCom open the controller and relay what the softcoding is on the ECU... I would suggest you've possibly plugged the front and rear connectors the wrong way around and that the units coded for rear's only... Edited March 22, 2011 by Mirez Quote
FLENG Posted March 23, 2011 Author Report Posted March 23, 2011 thanks for the reply i had a listen to the sensors and the rears are all clicking.. does anyone know where the rear beep comes from? Quote
Mirez Posted March 23, 2011 Report Posted March 23, 2011 thanks for the reply i had a listen to the sensors and the rears are all clicking.. does anyone know where the rear beep comes from? Sounders in the tailgate cubbyhole, passenger side. Quote
FLENG Posted March 23, 2011 Author Report Posted March 23, 2011 ok cheers i will whip off the trim and take a look thank you Quote
FLENG Posted March 25, 2011 Author Report Posted March 25, 2011 Ok so i checked out the speaker today, it looks brand new wiring all seems fine although i havent check the loom apart from what i could see in the back anything else i could try or shall i get someone to vag.com it thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.