Non Start

[mike bennett]

Hi

 

we have a T reg Galaxy 2.3 petrol manual, it had on one previous occasion not started but self cured, it failed again yesterday and i change relay 30 as when i reoved it and tested it i couldnt get continuity accross 2 pins.

 

So i reitted it all and it still doesnt go?? so, the imoboliser light comes on once whem i crank the engine and the flashes quickly once.

 

I can put it on our computer (TEXA) at th weekend but not before, so is the immobiliser working properly or do i have another fault with the Pats module?

 

Mike

[mikeshe]

Mike,

 

I had exactly the same problem on my daughters car last week. Remove relay 30 and make a short wire up with spade connectors on each end and bridge terminals 30 & 87 on the fuse box. After removing the relay look at where it came from and you will see a horizontal slot at the 3 o'clock position and another horizontal slot at the 6 o'clock position, this is where you want to put the wire you make up. If your car now starts change the relay.

 

Mike.