Front Blower Motor Resistor Help!

[musky]

Hi all,

 

I'm very new hear but have been working on my own cars for years and was hoping for a bit of help concerning the wiring of a Front Blower Motor Resistor for a 1998 Ford Galaxy.

 

I have bought a new connector and resistor and need to rewire them. If anyone can tell me what the wiring code or colour order to connect the three wires to the resistor, I would be very grateful. I did make a note but it has been lost.

 

Any help as soon as possible would be very much appreciated!!

 

Thanks in advance.

 

Musky

[Mirez]

I assume this is for a climate version not a manual dial version?

 

Pin 1 - White/Blue - Control

Pin 2 - Black/Red - To Motor

Pin 3 - Brown - To Ground

[musky]

I assume this is for a climate version not a manual dial version?

 

Pin 1 - White/Blue - Control

Pin 2 - Black/Red - To Motor

Pin 3 - Brown - To Ground

Hi Mirez

 

Thanks for the quick reply to my problem.

Yes, it is the climate version, the large 4mm wires i now know are pin2 and pin3 overheated and burnt the plastic connector.I have a haynes manual to which the wiring diagram shows as a 4 wire connection, same colour codes but different pins. I was on the internet all afternoon trying to solve the problem.

Once again thanks for your help.

 

Musky

[Mirez]

Ahh, the 4 pin version is the manual version not the climate - haynes seem to concentrate on the lower, I guess more commonly fitted stuff.