Areyoulookingatme Posted October 29, 2010 Report Posted October 29, 2010 Hi, Any one know why a garage would remove a sump on a 115 19TDI AUY code during a head gasket + skim & timing belt replacement. After rebuild engine would not run properly missing heavily. Was found to be all four injectors ? according to garage. Runs perfecly now. but why new sump gasket its a mystery to me. Quote
richiezx9 Posted October 30, 2010 Report Posted October 30, 2010 They may have dropped a small nut or washer down the oil port and had to retrieve it, alternativley if the oil had was in a right state (that horrible gunge you get when the oil and water mixes) they may have felt it nescacry to clean the oil pickup strainer......unlikely but possible Quote
Areyoulookingatme Posted November 1, 2010 Author Report Posted November 1, 2010 Hi thanks for your reply,no mix of oil & water as the leak was exhaust gases into the water system causing over pressuring.They could of dropped something down there {plonkas} or they have wanted to check oil pick up as you say, not used to garages doing a thorough job. Cheer. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.