simonw Posted August 27, 2010 Report Posted August 27, 2010 hello, anyone have a diagram of the firing order on a 98 2.8 v6 galaxy, is no 1 belt side or chain side?, is it front or back of engine ,thanks just have very lumpy between 1500-2500rpm, and running rich, can hear the slighty missfire even on idle, any ideas?, also when rev, quickly getting a grunting noise from engine, belt side sounds like where comming from, any help would be greatfull thanks Quote
Mirez Posted August 27, 2010 Report Posted August 27, 2010 1 - 5 - 3 - 6 - 2 - 4 With 1 being the back left cylinder as you look at it, so standing at front of car looking in: 1-3-5..2-4-6 Quote
simonw Posted August 27, 2010 Author Report Posted August 27, 2010 thanks for help will try to see if leads correct to get get rid of this anoyinng missfire, Quote
simonw Posted August 27, 2010 Author Report Posted August 27, 2010 1 - 5 - 3 - 6 - 2 - 4 With 1 being the back left cylinder as you look at it, so standing at front of car looking in: 1-3-5..2-4-6 i know im sounding thick but does no 1 on coil pack go to cylinder one , 2 to 2, 3 to 3 , 4 to 4 etc, help please , thannks Quote
Mirez Posted August 27, 2010 Report Posted August 27, 2010 Nope, the coil pack is 6-4-2 on the top row and then 1-3-5 on the bottom with 6 being the one in the corner next to the harness wiring connector. Quote
simonw Posted August 27, 2010 Author Report Posted August 27, 2010 Nope, the coil pack is 6-4-2 on the top row and then 1-3-5 on the bottom with 6 being the one in the corner next to the harness wiring connector. ok, thanks, my coil pack has numbers on it , so the port numbered 1 goes to cylinder1?, the numbers are from stamped in not done with tipex by joe bloggs , sorry , but a little confused, thanks mirez Quote
Mirez Posted August 27, 2010 Report Posted August 27, 2010 If its properly stamped then follow those numbers not mine! ;) Quote
simonw Posted August 27, 2010 Author Report Posted August 27, 2010 If its properly stamped then follow those numbers not mine! ;) ok, thanks for your help,will make sure is correct , ;) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.