patsy12 Posted June 21, 2010 Report Posted June 21, 2010 hi, l wonder if any one can tell me how to get the drivers swivel seat to go round without the steering wheel stopping it pleae. l have tried moving the steering wheel adjusting the seats ect getting really frustrated with it now. thanks for your other replioes. Quote
gregers Posted June 21, 2010 Report Posted June 21, 2010 push the seat back as far as it will go,then it should be able to pass the wheel without snagging. Quote
patsy12 Posted June 22, 2010 Author Report Posted June 22, 2010 hi, thanks but l tried that then it snags at the door.patsy Quote
gregers Posted June 22, 2010 Report Posted June 22, 2010 as far as i know,you cant swivel the seats unless the door is open. Quote
malcolm.dobell Posted June 22, 2010 Report Posted June 22, 2010 Haven't had one with swivelling seats for a while, but as far as I recall adjust the steering as though you've got gorilla arms, and I thought I had to adjust the seat forward and upright. Quote
patsy12 Posted June 30, 2010 Author Report Posted June 30, 2010 Thanks for all your input folks. l think it may have been fitted wrongly as l have had no luck with all your suggestions. Quote
Bigjeeze Posted June 30, 2010 Report Posted June 30, 2010 Thanks for all your input folks. l think it may have been fitted wrongly as l have had no luck with all your suggestions. All you need to do is to slide the seat to it's middle position then turn - it should easily avoid the steering wheel. Quote
patsy12 Posted July 1, 2010 Author Report Posted July 1, 2010 Thanks for all your input folks. l think it may have been fitted wrongly as l have had no luck with all your suggestions. All you need to do is to slide the seat to it's middle position then turn - it should easily avoid the steering wheel.Hooray . Success at last. Brilliant! :( Thanks for all your help. well now while l am on a roll can anyone tell me how l can lie the seats flat please as l have seen that you can make a 6'1 x 4' bed.Patsy Quote
Bigjeeze Posted July 1, 2010 Report Posted July 1, 2010 All you need to do is to slide the seat to it's middle position then turn - it should easily avoid the steering wheel.Hooray . Success at last. Brilliant! :( Thanks for all your help. well now while l am on a roll can anyone tell me how l can lie the seats flat please as l have seen that you can make a 6'1 x 4' bed.Patsy Hmmm... sounds like it could be an intere4sting drive!!. The only way you can flatten the seats is to adjust them using the tilt mechanism. I don't think they are designed to be a bed at any point. BJ Quote
Jayton Posted July 2, 2010 Report Posted July 2, 2010 You'd have to take the rear seats out to make a 'bed' in the back. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.