B-pillar Rattle

[simmy1903]

Hi,

 

I have a very annoying rattle which sounds like it is coming from inside the driver side B-Pillar (top section). I have unclipped the B-Pillar trim bottom & top halves, but can't see anything obvious. I suspect it may be coming from around the seatbelt anchor / airbag area.

I dont want to attempt completely removing the top trim because the airbag is located there and I'm not sure that if I prize the top trim off, will it upset the airbag?

 

Any suggestions welcome.

 

Colin

[RADIOTWO]

Hi Colin

 

I believe the procedure is to switch off the ignition (in fact take the key out) and leave 10 mins and should be fine, plus the fact

the sensor is not at the airbag.

 

so once the 10 or so mins are up gentle remove the covers and you should be ok

 

Radiotwo

[insider]

No need to worry about the airbag.

 

B_pillar.pdf

[simmy1903]

No need to worry about the airbag.

 

B_pillar.pdf

 

Thanks for the diagram, Can you explain what the 'Green' symbol is that is numbered '2' in the last diagram. I can't figure it out.

 

Colin