Remote Locking Problem After Battery Replacement

[jimp]

Hi, its my second time to post after a very positive first experience.

 

I had my 56 reg Galaxy battery replaced a few days ago at my local Kwik Fit. Since then the remote locking and alarm have not been working. Have changed the battery in the key also to see if that made a difference but to no avail.

If anyone has any pointers I would be forever grateful

[big_kev]

This is a Mk3 isn't it ?

[jimp]

This is a Mk3 isn't it ?

Yes bigkev, New shape galaxy.

[jimp]

I found the solution... and its very easy!!! Thanks to anyone who may have been trying to find out.

 

 

NOTE: A maximum of eight remote transmitters can be programmed and programming must be carried out at the same time for all the remote transmitters.

1. Fasten the safety belts and close all doors to make sure that conflicting chimes do not sound during programming.

2. The ignition switch must be turned to position II exactly four times during remote transmitter programming. Failure to follow this instruction may result in incorrect remote transmitter programming.

3. Turn the ignition switch from position I to position II four times exactly within six seconds.

4. Turn the ignition switch to position I. An audible chime will be heard to indicate that learning mode is enabled.

5. Press and hold one of the buttons on the remote transmitter until a chime sounds. This indicates a new remote transmitter code has been successfully received. Repeat this step, within 10 seconds, for any other transmitters you have.

6. Wait 10 seconds or turn the ignition switch to position II to exit learning mode.

7. Test all the programmed remote transmitters, by activating and deactivating the locking/unlocking functions.