Seat Belt Warning Light Not Working

[hocky]

when ignition is switched on the seat belt warning light does not come on and you can drive with out a seat belt on and it does not beep.

is there a fuse that has been removed? or is it something else?

thanks

[Mirez]

when ignition is switched on the seat belt warning light does not come on and you can drive with out a seat belt on and it does not beep.

is there a fuse that has been removed? or is it something else?

thanks

 

what year/model?

[hocky]

when ignition is switched on the seat belt warning light does not come on and you can drive with out a seat belt on and it does not beep.

is there a fuse that has been removed? or is it something else?

thanks

 

what year/model?

sorry its a 04 mk2 ghia diesel

[chromedome]

I haven't got a seat belt warning light...........

[bfc1001]

neither have i.

 

03 gal tdi

[Jayton]

I've got the light that illuminates on the dash when starting the car, it stays there for a few seconds then goes out after all the others... I tested it to see if it will warn me if the seat belt is not plugged in... no warnings... hmmm same problem maybe?

[hocky]

I haven't got a seat belt warning light...........

perhaps i have not got a problem then???

I only asked because if you look clsely at the speedo clock you can see there is a seatbelt warning sign but it does not illuminate. I read the manual and it says it will light up and a audible sould will be heard if seat blets are not put on.

[Mirez]

I've got the light that illuminates on the dash when starting the car, it stays there for a few seconds then goes out after all the others... I tested it to see if it will warn me if the seat belt is not plugged in... no warnings... hmmm same problem maybe?

 

The Mk2 Galaxy never had the seatbelt warning system installed. just the sharan/bamma - if the lights coming on then someones been fiddling in vagcom :wacko: (remove 02 from the coding)

 

Alternatively its probably a doddle to retrofit as most driver only warning systems are simple dumb ground switches which are made when the belts put in the socket - its only when you start adding passenger warning that you need occupancy sensors, you'll need to find where to run the wiring to on the clusters connector though which should be pin 31 on the blue connector (C170)

[hocky]

I've got the light that illuminates on the dash when starting the car, it stays there for a few seconds then goes out after all the others... I tested it to see if it will warn me if the seat belt is not plugged in... no warnings... hmmm same problem maybe?

 

The Mk2 Galaxy never had the seatbelt warning system installed. just the sharan/bamma - if the lights coming on then someones been fiddling in vagcom :wacko: (remove 02 from the coding)

 

Alternatively its probably a doddle to retrofit as most driver only warning systems are simple dumb ground switches which are made when the belts put in the socket - its only when you start adding passenger warning that you need occupancy sensors, you'll need to find where to run the wiring to on the clusters connector though which should be pin 31 on the blue connector (C170)

 

thanks for the reply,thats cleared up 1 fault i thought i had, now i can concentrate on the dodgey parking sensor i have on the front.

best regards Hocky