Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

i have a 03 galaxy tdi 115 bhp ghia diesel

 

 

history

 

 

had the usuall power loss and limp mode replaced the maf sensor (auy engine)and cleaned the turbo and vanes

 

 

new prob few days later car is running very lumpy and noisey with little power

 

 

fault codes are the fallowing

 

 

16485

maf circuit range performance

 

17965

charge preasure control / positive deviatation

 

17978

engine start blocked by immobiliser

 

18008

power supply (B+) terminal 15 low voltage

 

00668

supply voltage terminal 30.

 

i need the following help with the codes i understand the new mf(bosch) is no good so i will purchase a new one. i need help in identifying what 17965 is and 17978 18008 and 0068.

 

any help appreciated thanks dave :)

Posted
16485

maf circuit range performance

17965

charge preasure control / positive deviatation

17978

engine start blocked by immobiliser

18008

power supply (B+) terminal 15 low voltage

00668

supply voltage terminal 30.

 

Clear the codes and see what comes back, 18008/00668 are almost certainly a flat battery in the past. 17978 is a normal immobiliser code, an unrecognised key is the cause which again you just need to clear and see if it comes back. 17965 - search for sticking turbo vanes :) but again clear the codes. At the moment you have no idea whats new and what occured 5 years ago!

Posted
hi mirez thanks for the help bought another maf and fitted cleaned the vanes and turbo using the innotec product (i bought 2 lots last time) and hey presto back to normal thanks for the fast reply and all codes have been cleared dave :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...