alanrob Posted April 9, 2010 Report Posted April 9, 2010 I have successfully got the VAG-COM working on my 2.3 Galaxy. Its one of the cheap blue leads I got of Ebay. Using the 4091US software I downloaded and the serial usb driver my laptop found on its own. (I have another usb serial adaptor i use to talk to my robots so dont know if its using this driver) Anyway the software found the adaptor on COM3 even without it plugged into the car. But it wouldnt find the control modules when plugged into the car. Via device manager on the laptop I changed the com port of the serial adaptor to COM1 (was COM15) and changed then baud rate to 4800 and then everything worked fine. Al Quote
Jayton Posted April 9, 2010 Report Posted April 9, 2010 It'll only work with VAG modules, I was told you can use the ODB-II (bottom left corner) to get the generic ODB-II codes. Quote
sparky Paul Posted April 9, 2010 Report Posted April 9, 2010 Yes, for engine functions you need a EOBD/OBD2 cable. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.