Seat Belt Broken

[gertygutbucket]

Hi I have a 2001 Mk2 Galaxy and the middle 3 point seatbelt has broken. Its the right sided where you bring the belt down to clip into place to make it 3 point. It has completely snapped apart and can't clip it back together and I am due for an MOT soon and need to find where I can buythem, then and try and fit it myself without buying a new complete belt? Any pointers please? Thanks!!!

[gertygutbucket]

Also I had to have a whole new boot lock as it stayed open even when I locked the car but since then the boot lights don't go out nor does the 'door open' light on my dashboard even whilst driving, it just stays on all the time???? yet they are all locked, also my reverse lights don't work sooo annoying!!! Oh and how much does the underneath part of the exhaust and all break discs cost any idea's?

[Mirez]

Hi I have a 2001 Mk2 Galaxy and the middle 3 point seatbelt has broken. Its the right sided where you bring the belt down to clip into place to make it 3 point. It has completely snapped apart and can't clip it back together and I am due for an MOT soon and need to find where I can buythem, then and try and fit it myself without buying a new complete belt? Any pointers please? Thanks!!!

 

I'm not sure exactly what bit's broken?

 

 

Thats how its shown as a parts breakdown, it sounds like you are talking about the clip that latches into part 9? If so then A, how the hell did you manage it because its metal reinforced? and B, you'll need a new belt as it can't be replaced on its own.

 

As a temp workaround and only if nobodys going to use the seat you can remove the whole seat prior to taking the car for its MoT and it should pass with an advisory as it can't be tested.

[gertygutbucket]

Hi I have a 2001 Mk2 Galaxy and the middle 3 point seatbelt has broken. Its the right sided where you bring the belt down to clip into place to make it 3 point. It has completely snapped apart and can't clip it back together and I am due for an MOT soon and need to find where I can buythem, then and try and fit it myself without buying a new complete belt? Any pointers please? Thanks!!!

 

I'm not sure exactly what bit's broken?

 

 

Thats how its shown as a parts breakdown, it sounds like you are talking about the clip that latches into part 9? If so then A, how the hell did you manage it because its metal reinforced? and B, you'll need a new belt as it can't be replaced on its own.

 

As a temp workaround and only if nobodys going to use the seat you can remove the whole seat prior to taking the car for its MoT and it should pass with an advisory as it can't be tested.

Hi thanks, lol @ how the hell did I break it...no its not no. 9 unless the picture is in reverse as its the black plastic bit which surrounds the metal bit that clips into slot 12.

[Andy Young]

I normally use these guys for my Ford Car Parts., try them out if you get a minute!!