Mfd For Galaxy 1999

[defadog]

Hi,

 

I was wondering if anyone had any usefull information on the 1999 RNS/MDF. For some reason the Language is stuck in GERMAN. I have been looking on many different sites to see if this can be changed - to no avail.

 

Does anyone know where I can get a FIRMWARE for the system?

 

Does anyone know how to change the language back to ENGLISH from GERMAN?

 

Does anyone know where I can get a copy of the Non-DX UK map?

 

Any HELP would be most appreciated..

 

 

 

THANKS in advance

[big_kev]

Do you have the model number on this ?

[defadog]

Do you have the model number on this ?

 

These are the numbers printed on the side of the Unit:

 

SN: BP1442X3769043

7 612 001 442

XM21 18K931 AC

7M0 035 191 A

 

from what I can remember it is a MFD (a) RNS - non-dx

 

THANKS

[big_kev]

I think the language can be chosen via the menu system.

 

Keep pressing the menu button until you get to the language setting and then change this to eng

lish........okay....this may be difficult until you figure out the german for language......suggest using an online translator ( google, or whatever ) on all the mneu options until you find the one for language.

 

I am also assuming you do not have a manual for this ?

 

If not click link below and find it.

 

http://fordfcsd.wunderman.be/UK/

[defadog]

Will look through the Manuals on-line and hopefully they will help/assist me.

 

I cant see a MENU button on the System. I can get the Information of the System by holding 3 and 6 together which brings up all the HW/SW with a date of AUG 1999 etc. and INFO and AS buttons when turning on brings me into the FIRMWARE menu. but I cant seem to find any other MENUS.

 

Will have another look tommorow, and Translate via google.

 

 

THANKS

[defadog]

:)

 

STILL NO LUCK - any more help from anyone ????????????????????

[Mirez]

:)

 

STILL NO LUCK - any more help from anyone ????????????????????

 

 

I'll check the menu's tomorrow for you

[Mirez]

Ok you won't be able to do this without a nav disk in the unit:

 

Turn it on and press the "NAVI" button - wait for the disk to load and the screen to change a map

Push the right rotary dial in once for enter

Scroll to the bottom right option (SETTINGS) and push enter again

Scroll to the top left option (SELECT LANGUAGE) and push enter

Scroll down 3 options to "ENGLISH IMPERIAL" and push enter

 

Done :rolleyes: