homer1033 Posted February 21, 2010 Report Posted February 21, 2010 Hi guys had a little search for my problem & i think i may have the answer but would like your thoughts just in case. I've just come home & noticed on the way home that my temp gauge needle wasn't moving but every now & then it moves to just under half way then shoot back to the beginning of the white ??? I have plenty of hot air coming from the heaters. So my thoughts is ...Could it be the Thermostat ?? if so how easy is it to replace & general location.. If I'm wrong please can anyone point me in the right direction to my fault..... Many thanks in advance...Kev Quote
Triple Trouble Posted February 21, 2010 Report Posted February 21, 2010 Hi guys had a little search for my problem & i think i may have the answer but would like your thoughts just in case. I've just come home & noticed on the way home that my temp gauge needle wasn't moving but every now & then it moves to just under half way then shoot back to the beginning of the white ??? I have plenty of hot air coming from the heaters. So my thoughts is ...Could it be the Thermostat ?? if so how easy is it to replace & general location.. If I'm wrong please can anyone point me in the right direction to my fault..... Many thanks in advance...Kev Had a similar problem with ours, got my local guy to check it over, found the water temp sensor contacts were dirty. He cleaned them up, and touch wood, things are a lot better! Quote
homer1033 Posted February 21, 2010 Author Report Posted February 21, 2010 Hi triple trouble thanks for your reply on my fault its most appreciated...... Please could you tell me where about the sensor is situated so i could check ?? thanks Quote
mk2vr6 Posted February 21, 2010 Report Posted February 21, 2010 both located near the stat or on the stat housing IIRC? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.