syedorf Posted February 14, 2010 Report Posted February 14, 2010 hi there was on my way home before on the motorway doing 65 and i tried accelerating and the power was on off on off etc etc for about 3 miles it did it continously i have had occasional little blips but this was major so i have spent the last couple of hours trawling through some posts and the faq but nothing the same i will have to have a look at the vacuum hoses tomorrow but i am not sure that is the problem as it surely would stay with no power if a hose wasnt supplying vacuum to wastegate map sensor etc has anyone had this fault or is it just starting a problem with the vac pipescheers si Quote
BeeJay Posted February 15, 2010 Report Posted February 15, 2010 hi there was on my way home before on the motorway doing 65 and i tried accelerating and the power was on off on off etc etc for about 3 miles it did it continously i have had occasional little blips but this was major so i have spent the last couple of hours trawling through some posts and the faq but nothing the same i will have to have a look at the vacuum hoses tomorrow but i am not sure that is the problem as it surely would stay with no power if a hose wasnt supplying vacuum to wastegate map sensor etc has anyone had this fault or is it just starting a problem with the vac pipescheers si Hi Si I'm not an expert but you may find it useful to check out the posts on 'turbo problems' I seem to recollect that when the turbo blades are dirty they cannot open properly and that gives a loss of power. Usually this happens if you rarely open the turbo by using the revs. good luckbeejay Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.