Galaxy Stereo Wire Identification

[kilo7]

Hi all, I hope someone out there can help.

 

I have not long bought a galaxy, 96 p reg, It has an aftermarket stereo fitted which to be honest is sh%t so I wanted to change to maybe a cd changer etc, however i pulled out the old one to find the wires have been butchered

 

Can anyone provide details of what coloured wires from the galaxy do what, positves etc, any help would be great.

 

I appreciate this may have been covered previously i have looked through the posts but couldnt find anything, ive been all over the net and can only find american sites and diagrams, which all relate to the plugs which is what im missing,

 

I basically have the wires all loose and need to identify which ones are for what,

 

 

HELP!!!!

[Mirez]

Sounds like fun! Has it got the Ford Amp still in place or has that been bypassed as well?

 

The numerical value at the start is the wire thickness, the smaller the thinner the wire will be.

The colours are read at the majority being the first colour and the second being the stripe.

Finally I've put the original pin location on fords connector in brackets at the end.

 

0.5 Grey/Blue Illumination (4)

2.5 Red/Red Main Supply (1)

1.5 Brown/Red Ignition Supply (3)

0.5 Brown/Yellow Ilumination Ground (2)

2.5 Brown/Brown Main Ground (6)

0.5 Red/Red Potential Supply (5) **Its not overly clear what this is but would appear to be an early VSS or Speed signal**

 

That completes the power connector, there is a comms in from the stalk controller if you have that and everything else passes on to the amplifier but isn't labeled or colour coded. I dont have time to go further into it at the moment so see how you go and whats left over now you can remove the power connector's cabling.

[smmudge]

Hi,

 

I have a Seat Alhambra registered in 2000 but with the earlier Ford wiring loom and radio system with a separate amplifier. I would like to fit a new DAB radio but the cable connections are all "unusual" and I don't seem to be able to find a connector that will allow me to fit a new radio (with ISO connectors) to the speaker system (I think there are 10 in the vehicle in total)... Does anyone have any solutions to this or possibly the pin out for the 14 pin connector which I assume is the output to the speakers?

 

Many thanks

 

Steve