Benn2001 Posted January 7, 2010 Report Posted January 7, 2010 The seat belt on the drivers side is quite loose and must be 'spoon fed' back in after use. Any advice on replacing the part that sucks it back in? Benn Quote
Richard gal Posted January 8, 2010 Report Posted January 8, 2010 (edited) The seat belt on the drivers side is quite loose and must be 'spoon fed' back in after use. Any advice on replacing the part that sucks it back in? Benn You would have to replace the whole thing really. Edited January 8, 2010 by Richard gal Quote
Benn2001 Posted January 8, 2010 Author Report Posted January 8, 2010 The seat belt on the drivers side is quite loose and must be 'spoon fed' back in after use. Any advice on replacing the part that sucks it back in? Benn You would have to replace the whole thing really. If this is the case, I think I should probably leave it as it is. Thanks Quote
mk2vr6 Posted January 8, 2010 Report Posted January 8, 2010 it's a straight forward job to replace the seat belt mech, the B post trim has to come off along with the door threshold trim cover that hides the explosive chamber! its not as bad as it sounds! but you will need a torque wrench to set the bolt for the pretensioner in order for it to be primed correctly! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.