Benn2001 Posted December 28, 2009 Report Posted December 28, 2009 Hi yall Collecting my 2002 Galaxy1.9TDI LX in a week and am thinking of adding parking sensors to the car. The thing is, I dont know a lot about the difference between all the kits on the market and dont want to end up with one that clearly looks as though it isnt factory fit, I would like to get as close to the original fitted Ford unit as possible. Has anyone done this themselves and can give me any recommendations? Benn Quote
mk2vr6 Posted December 29, 2009 Report Posted December 29, 2009 I bought a set off ebay, easy enough to fit, plenty of online sites to take your pick from one for starters http://www.parkingsensors.co.uk/index.asp Quote
Benn2001 Posted December 29, 2009 Author Report Posted December 29, 2009 I bought a set off ebay, easy enough to fit, plenty of online sites to take your pick from one for starters http://www.parkingsensors.co.uk/index.asp Loads to choose from on Fleabay but difficult to male out the good ones from the bad. Nice link, thanks. I think I may go for the Dolphin 6. Anyone know if Galaxy's that are not fitted with parking sensors still come with the holes pre drilled in the bumpers? Benn Quote
bj2004 Posted December 29, 2009 Report Posted December 29, 2009 I bought a set off ebay, easy enough to fit, plenty of online sites to take your pick from one for starters http://www.parkingsensors.co.uk/index.asp Loads to choose from on Fleabay but difficult to male out the good ones from the bad. Nice link, thanks. I think I may go for the Dolphin 6. Anyone know if Galaxy's that are not fitted with parking sensors still come with the holes pre drilled in the bumpers? Benn mine wasnt but parking sensors i bought off ebay came with a hole saw so i could place them slightly away from the tow bar Quote
Benn2001 Posted February 7, 2010 Author Report Posted February 7, 2010 mine wasnt but parking sensors i bought off ebay came with a hole saw so i could place them slightly away from the tow bar Did you fit them in the centre of the bumper? I have attempted this but the bumper bar is in the way, the sensors are too deep to push in :25: Quote
bj2004 Posted February 7, 2010 Report Posted February 7, 2010 (edited) Just had a look they are about 1/2" above centre but i fitted a towbar so dont know if this makes a difference than the original bumper Edited February 7, 2010 by bj2004 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.