robpol Posted December 3, 2009 Report Posted December 3, 2009 (edited) Hi Guy's, this is my first post,been brousing and enjoying your forum for a while now. I have a screaching noise (best as i can describe it) on full lock when throttle is applied, now the noise is not the belt as it was replace 2 months ago and is tight, could it be the alternator pulley or something like that?? Thanks its a galaxy mk2 2003 tdi zetec 115bhp Edited December 3, 2009 by robpol Quote
big_kev Posted December 3, 2009 Report Posted December 3, 2009 It could be a tensioner pulley wheel or anything else attached to the drivebelt. Can you visually see anything wobbling or jumping about. I would double check the belt though and make sure it isn't sticking. Quote
robpol Posted December 3, 2009 Author Report Posted December 3, 2009 (edited) Thanks Kev, i'll check to see if anythings wobbling tomorrow.Hope this isn't a stupid question but what could cause the belt to stick? Cheers Rob. Edited December 3, 2009 by robpol Quote
big_kev Posted December 3, 2009 Report Posted December 3, 2009 When you have your power steering on full lock it is likely to overload the pump which will require more power than the drivebelt can provide. As the belt goes around the pully wheel on the pump the belt will be dragged over it causing a screeching sound. Or possibly the belt will be dragged over the main drive pulley again causing a screeching sound. Did you have any problems before the belt was changed ? Quote
robpol Posted December 3, 2009 Author Report Posted December 3, 2009 not sure as i've only owned the vehicle for a week. Rob. Quote
robpol Posted December 3, 2009 Author Report Posted December 3, 2009 Not sure if it has a genuine alternator belt, do you think a new genuine belt would be worth a try if i can't see anything else wrong? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.