Jump to content
Ford Galaxy Owners Club

Recommended Posts

Guest boomoottna1
Posted

99 (V) 1.9TDi - I am pulling my hair out - The front wipers do not work, the back wipers are OK, all the water sprays work. I have tried checking the all the fuses, they seem to be OK. How do I check the motor, or, is there a relay that controls the wipers on this model. Hopefully someone can help.

 

Also the VW motors are much cheaper - is there a VW wiper that will fit this model ?

Posted (edited)

Buncers, different electrics for 98-99 Models...

 

For vehicle built to 09/98, Double check F29 (5A) , F8 (30A) and K162 Relay (located in central junction box)

 

 

For vehicle built after 09/98, Double check F33 (25A or 30A after 09/99), no relay fitted.

post-62-1080831708.jpg

Edited by seatkid
Posted
boomoottna1, in reply to your email, it could be the load reduction relay (k149 - R26 - central junction box, bottom panel) but are you sure you checked fuse 33?

post-62-1080948000.jpg

Guest boomoottna1
Posted
I have spent alot of time on this problem because the local dealer wanted
Guest wolfman62
Posted
My front wipers have started to play up. Stopped altogether the other day after a jetwash. Today in heavy rain would run at normal speed then slow and judder almost stopping then run okay again. Any ideas please.
Posted

My neighbour had a similar problem on his 3 year old MK 1 Alhambra. The technician at the dealer replaced the motor to no avail. FOUR months later (It took that long to get the parts - honest) and they replaced the siezed linkage - why didn't they un-sieze it I hear you ask - I don't know I'm not a highly trained, expensive technician.

 

Good Luck,

 

Gerald

Guest wolfman62
Posted
I removed the motor and gear drive etc. I found that the electronics board on the unit was half covered in mildew??? The board is covered in a clear rubber coating which i cannot remove. I covered the lot in wd40 including all connections then put it all back together. It seems to be okay at the moment but only ime will tell. I will also lube all the linkages I think.
  • 3 weeks later...
Guest boomoottna1
Posted
Finally found the problem - It was the wiper control electronics attached to the motor it self. Went to intapart and got a new motor and control board for

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...