morphias Posted September 21, 2009 Report Posted September 21, 2009 hi could some 1 give me some advice on how to remove the break servo or is there a link with some instructions on how to do this as i am haveing great difficulty getting it out of that tiny space lol any help would be helpful cheers morphias............the car is a 1.9tdi 2001 cheeers Quote
marinabrid Posted September 21, 2009 Report Posted September 21, 2009 when the mechanic did ours he told me it was a long job and he had to lower the engine from the mounts to get the servo out Quote
Bigjeeze Posted September 21, 2009 Report Posted September 21, 2009 According to the TIS you need to remove the Master Cylinder first - then remove the EGR valve and it should then be clear to remove - You firstly move it to the right then pull the left side forward and then it's out. It doesn't mention anything about dropping the engine or similar. If you don't have a copy of TIS have a look on Ebay you can get a copy for less than Quote
morphias Posted September 22, 2009 Author Report Posted September 22, 2009 According to the TIS you need to remove the Master Cylinder first - then remove the EGR valve and it should then be clear to remove - You firstly move it to the right then pull the left side forward and then it's out. It doesn't mention anything about dropping the engine or similar. If you don't have a copy of TIS have a look on Ebay you can get a copy for less than Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.