bigphilly Posted August 6, 2009 Report Posted August 6, 2009 Hi i was wondering if anyone could help me out,I have an 05 galaxy 1.9tdi and the air con pipe that runs from the compressor, round the engine bay and into the bulkhead has broke just down from the compressor. Peoples ford have said a new pipe will set me back a minimum of Quote
cyborg Posted August 6, 2009 Report Posted August 6, 2009 hi big philly an welcome to the galaxy forumdepending where the break is you might do it with a fiver spent on a B & Q Compression fitting (pipe connector). Volkswagen sharan ,seat Alhambra and ford galaxy are all the same more or less bar the badgesso its possible to widen your search for the pipe i did a quick search for you looks like this bits got your name on it of course you need to check part no. http://cgi.ebay.co.uk/VOLKSWAGON-SHARAN-TD...id=p3286.c0.m14 as for an alloy weld, the weld would probably last forever not so sure about the pipe :) Quote
Steven.Langdale Posted August 6, 2009 Report Posted August 6, 2009 Hi i was wondering if anyone could help me out,I have an 05 galaxy 1.9tdi and the air con pipe that runs from the compressor, round the engine bay and into the bulkhead has broke just down from the compressor. Peoples ford have said a new pipe will set me back a minimum of Quote
seatkid Posted August 6, 2009 Report Posted August 6, 2009 (edited) Until you take off the pipe, tape up the joint to prevent moisture and dust getting in. When you take off the pipe, immediately bung up the open ends of the system for the same reason. If you repair your pipe, make sure you clean the inside thoroughly and remove any debris/swarf otherwise you may find you need a new compressor a couple of weeks later. Good luck. Edited August 6, 2009 by seatkid Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.