craigm Posted July 18, 2009 Report Posted July 18, 2009 Hi, Whilst replacing the offside dipped bulb in 02 V6 Galaxy, I pushed the connector on a bit too forcefully and the housing containing the main and dipped bulbs pushed forward into the unit. This housing is now loose and I can't see anyway to retain it again. There seems to be nothing obvious to pull it back to latch onto. Have I snafu'd something or is there a way to retain it? TIA Craig Quote
chromedome Posted July 18, 2009 Report Posted July 18, 2009 It could be that the assembly has become detached from the levelling motor. You may have to remove the whole headlight assembly for a better look. Quote
craigm Posted July 19, 2009 Author Report Posted July 19, 2009 (edited) It could be that the assembly has become detached from the levelling motor. You may have to remove the whole headlight assembly for a better look.Yep - well the levelling screw, no motor on this model. Took the headlamp out, rmoved the back lookied in. The ball had come out of the joint. Reattached and reassembled and all's well. Thanks for advice Craig Edited July 19, 2009 by craigm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.