andy936 Posted June 25, 2009 Report Posted June 25, 2009 hi all i hope your well - having to slowly iron out faults in my 52 reg galaxy i have 1 that is doing my head in :blink: its the clock on my dash the light doesnt come on when i turn the headlights on is there a way to remove the clock so i dont damage the dash-the clock is a analogue type(its has hands)- i must get a haynes manual !!! thnx- andrew Quote
suzuki91 Posted June 25, 2009 Report Posted June 25, 2009 you wont get a haynes for it, they did not do one! Quote
big_kev Posted June 25, 2009 Report Posted June 25, 2009 The clock and its surround unclip See Here ! Quote
chromedome Posted June 27, 2009 Report Posted June 27, 2009 (edited) If you use a couple of wooden clothes peg halves you can prise the clock forward out of it's housing without damaging the plastic. You do not need to remove the surround.You will then see a lamp fitting. You can buy these from most accessory shops. Note the bulb is part of the holder and can't be separated. Hope this helps. Edited June 27, 2009 by chromedome Quote
pauloalmas Posted July 17, 2009 Report Posted July 17, 2009 Hello everyone. I'm new in this forum and I'm about to install a clock on my 2001 VW SHARAN. Just a little problem ... I have 4 connections and I don't know for sure what is the purpose for all the connections and where do I connect it ... Can anyone help me ? ThanksBest regardsPaulo Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.