davec Posted June 21, 2009 Report Posted June 21, 2009 Cleaned pads and calipers when I serviced it on 13th June and the warning light came on for an hour then went off,there was loads on pads and thought it was a bad connection or the brake cleaner shorting out the wiring through the pad.It has come back on today and all the connections look good. Does anyoneknow how I can prove if it is front or rear pads,tryed connecting the two wires in the siocket together and the light stayed on.I know it doesnt need clearing by laptop as I replaced front pads a couple of years ago and the light went straight off,if no luck I'll hope for best and replace the back pads,I think the wires must go brittle with the heat Quote
smoggy7 Posted June 21, 2009 Report Posted June 21, 2009 hi i had this trouble a while ago if it aint the rear pads /front then theres prob a wire touching the wall of the car its under the dash in the bonnet compartment its location is at the back there somewhere i booked mine in as it was a bloody nightmare to find but thats where they told me it was , good luck smoggy Quote
gregers Posted June 21, 2009 Report Posted June 21, 2009 (edited) do you have enough brake fluid? Edited June 21, 2009 by gregers Quote
davec Posted June 21, 2009 Author Report Posted June 21, 2009 Hi both thanks for replies,have checked wiring and all looks good,no chafing and everything is good,fluid is well up to top mark am pretty sure I have broken one of the wires inside its insulation,think next time i will wear a mask and blow evrything out withj airline and spray.Last time it was Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.