Vag Com Code

[neilcentry]

Having just replaced the glow plug in the auxilliary heater i had my first go with the Vag-com and was able to clear all the codes except the one above.

 

The aircon system started doing the flashing thing on startup at the same time as i had the smoking aux heater so i assumed the two were connected. Howeverr i am not so sure now.

 

The aircon works fine i think. Certainly blows cold enough although the heating does take a while to get going.

 

Anyone got any ideas as to what i should be looking at or where?

 

Cheers

 

Neil

[big_kev]

Anyone got any ideas as to what i should be looking at or where?

 

The fault is with the motor that controls the flap that switches between outside and recirculated air.

 

Can't remember which flap this is on the unit but two of them ( items 3 & 4 in the pic below) are visible when you remove the glove box.

 

 

Check these and see if they move when the recirc. switch is turned on/off.

Edited May 6, 2009 by big_kev

[neilcentry]

Anyone got any ideas as to what i should be looking at or where?

 

The fault is with the motor that controls the flap that switches between outside and recirculated air.

 

Can't remember which flap this is on the unit but two of them ( items 3 & 4 in the pic below) are visible when you remove the glove box.

 

 

Check these and see if they move when the recirc. switch is turned on/off.

 

 

Thanks for that.

 

I shall have an explore session tomorow and see if i can get behind the glovebox. Might just check the fuse first though..lol.... would hate to tear the car appart and find its the obvious stuff.

 

Cheers