Fault Code

[davie]

I have a 2.3 mk 1 gal with a gas conversion and wont run properly a misfire when under load and a flat spot in the power around 4000 rpm. I have a draper expert fault code reader but it says it does the gal from 01 onwards but i still tried it and it came up with 3 faults so i reset it and it keeps showing code P 0135 so i compared it to the codes i have and it say's "O2 sensor heater circuit bank 1 sensor 1" does anyone understand what this could be as i am getting ready to take it to FORD!!!!!

[f0ster]

most likely the oxy sensor has failed, does it usually run ok on gas as opposed to petrol, I find lots of cars engine managment systems do not like running on gas and put the engine check light on,

[davie]

most likely the oxy sensor has failed, does it usually run ok on gas as opposed to petrol, I find lots of cars engine managment systems do not like running on gas and put the engine check light on,

 

not really run it on the gas as not that impressed with the way it has been fitted(before i bought the gal) where is the oxy sensor about? give me a pinto or cvh no worries but there is to much electronics for me nowadays