pat19581 Posted April 17, 2009 Report Posted April 17, 2009 hi fixd the oil cooler car ran ok for cam back next time i went out the car was not idleing just kept cuting out its ok if you rev the car up drives ok just will not idle vagcom found some codes 00553 mass air flow sensor (g70) 28.00 short to b+ and 00516 closed throttle idle posion switch (f60) cleard the codes but 00553 comes back any help someone its a v6 2.8 Quote
mk2vr6 Posted April 17, 2009 Report Posted April 17, 2009 sounds like you possibly have an air leak on the inlet side? or you've disturbed something while you were working in the engine bay try resetting the throttle position sensor, switch on the ignition without starting the engine and leave the key in that position for a few minutes, you should hear the throttle position motor go through its range checks and reset itself, switch off and then see how she runs? Quote
pat19581 Posted April 17, 2009 Author Report Posted April 17, 2009 sounds like you possibly have an air leak on the inlet side? or you've disturbed something while you were working in the engine bay try resetting the throttle position sensor, switch on the ignition without starting the engine and leave the key in that position for a few minutes, you should hear the throttle position motor go through its range checks and reset itself, switch off and then see how she runs?ok ill give that a go thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.