harpster Posted October 18, 2008 Report Posted October 18, 2008 hii Have mk2, 1.9 TDI BammaI have a bad hesitation in the mornings of car judder (revs drop and cars going to stall, it has stalled 2 times) and lots of white smokes also comes from the Aux Heater exhaust for about 5 minutes. It does the stalling only when cold at present, but i think its getting worse as it lasts longer.I also have slight hesitation when driving up the gears. I have been looking at the TIS manual and i can't locate any isv or icv to take of and clean.is there another part i should be looking for ?Could it be the Maf causing this instead or aux heater glowplug !!Please advise guys thankyou Quote
sepulchrave Posted October 18, 2008 Report Posted October 18, 2008 You are correct, your TDi does not have ISV or ICV. You'll be deluged with a bewildering array of possible solutions, but to eliminate the MAF you simply unplug it and run it without. Quote
harpster Posted October 18, 2008 Author Report Posted October 18, 2008 hi sepulchrave, i will start it tomorrow morning with the maf disconnected and see if i get the rough start. Thanks :16: Quote
harpster Posted October 20, 2008 Author Report Posted October 20, 2008 Hi Update, diconnected the maf and there was no hesitation of stalling, but there is still a extreme rough sound like a drill or vacuum, when reving, what can this be guys, please advisethanks again :rolleyes: Quote
edatelder Posted October 20, 2008 Report Posted October 20, 2008 HiLots of abbreviations floating around here!What are TIS, ISV, ICV & MAF to help us all out? Quote
harpster Posted October 20, 2008 Author Report Posted October 20, 2008 hi edatelderTIS = is a ford manual for carsMAF = is a Mass air flow meterISV = is a Idle Stableizer valveICV = is a idle control valvethere you go Quote
edatelder Posted October 21, 2008 Report Posted October 21, 2008 Thanks harpster.Is that the thing with the plug on it in the outlet pipe from the air filter to the turbo. I had one of those go and it was about Quote
harpster Posted October 23, 2008 Author Report Posted October 23, 2008 thats the part, MAF, it costs about 50 to 65.00, and takes 5 minutes to fix, two phillips screws to undo. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.