Maf Sensor To Filter Housing Clips

[POMPEYFAITH]

Hiya Guys

 

On replacing the coil pack,ht leads and plugs yesterday I broke the top clip that holds the maf to the filter housing plus there was not a clip on the bottom so i just pushed it together thinking it will be ok and took it for a run everything OK drives super until the engine warms up i stopped at lights and she stalled when i got home i had a look and thought it must be air starvation so as a quick fix i put two small screws in pipe where it joins together just a turn into the maf as i did not want to Pierce it went for another run all OK now.

 

I will have to look at the scrappy for another filter box lid but in the mean time that will do.

 

Just surprising a simple thing like that can disturb the tick over.

 

Regards

 

Pompeyfaith :angry2:

Edited August 13, 2008 by POMPEYFAITH

[Stevoo]

Both mine have snapped, get some long tie clips and hook them round each side and pull them tight, mine has been like that for a year and no issues.