On Board Computer. Mpg, Distance Etc

[ACD1055]

My Gal doesn't have a handbook I'm not sure how to fully operate the on board computer display that shows mpg, distance travelled etc using the wiper control stick on the right hand side of the steering wheel so I dont know the tec names.. It currently has lots data in there but I don't know what most of it means nor do I know how to reset it.. Does anyone have a how to kind of guide?

 

BTW my Gal is a 1.9TD Ghia X Reg

 

Thanks

Dave

[smudge2002]

Dave,

At the end of the stalk there is a switch which will cycle through the various readings. On the bottom of the stalk there should be a switch that will change the display between two different readings. In number 1 (there is a small 1 in the top right corner of the display) the readings reset after the ingition has been switched of for two hours. Number 2 is a cumulative and is reset manually. I tend to reset this when I fill up (if I remember) to see the cumulative mpg, distance travelled etc on a tank of fuel. To reset these values, set the display to mode you want, 1 or 2, then depress and hold the button on the bottom of the stalk for a few seconds until the readings are reset. Hope this makes sense.

 

Smudge.

[ACD1055]

Smudge thank you very much it makes perfect sense.. i'll print of your reply and have a play later..

Thanks again.

 

I am in the process of trying to get hold of a handbook.

 

Dave