Coxsey Posted May 13, 2008 Report Posted May 13, 2008 I have downloaded Vag-com from the Ross Tech website and i am having problems getting it to recognise the lead. When i plugged my lead in (USB-Serial) my laptop started to download a driver from windows update. (USB- Serial adaptor) I have set the port in the control panel to com 1 but when testing the message says Port Ok Interface not found. The pc is runing on Vista SP1. Any help would be appreciated. Thanks Quote
j0nesy Posted May 13, 2008 Report Posted May 13, 2008 i had same problem with com 1 so i changed it to com 2 and restarted vista and it works fine now Quote
Vince Posted May 13, 2008 Report Posted May 13, 2008 Port ok, interface not found means... It found the port, but the vag interface was not on the end (or it did not reply).The scenario where changing the port made it work, quite possibly com1 already existed and the vagcom interface was actually on com2, so com1 was found but no interface existed, com2 was also found and the interface was on there too. Another possibility was that the interface came up as com1 and clashed with some existing hardware, then trying to use it would give unpredictable results. Vince. Quote
Coxsey Posted May 13, 2008 Author Report Posted May 13, 2008 Ok daft question (Obvious answer?) Vista as downloaded the serial port replicator driver, but do i now need another driver for the ODB side of things? If so where can i get one from, cant find original disc that came with the lead. Thanks Quote
j0nesy Posted May 13, 2008 Report Posted May 13, 2008 the vista one worked fine for meyou did have the Ignition on dint you Quote
Coxsey Posted May 13, 2008 Author Report Posted May 13, 2008 Ok all sorted now. cleared down the faults i could find. Couldn't find many controllers tho. Which ones can you find normally? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.